Kappa®

Item No.: F101

The proven bicycle stand with robust construction.

Quality Features

ADFC approved CO₂ reduced DIN tested Made in Germany

Features

Maximum tire width 70 mm

Modularly expandable

Theft-proof locking option

Surfaces

RAL powder coating Stainless steel, electropolished

Steel, hot-dip galvanized (DIN EN ISO 1461)

Kappa®

The proven bicycle stand with robust construction.

Secure bike locking

Securely lock the bike to the integrated lock holder with a cable lock or U-lock.

No Paint Damage On The Bicycle

The angled main bracket prevents contact with the bicycle’s painted surfaces.

Tire width

Suitable for all bike types with a tire width of up to approx. 70 mm.

Stable footing without locking

The bicycle stands securely on its own, while the integrated wheel guide prevents it from rolling away.

Modularly expandable

The Kappa® can be flexibly expanded as a modular bicycle parking system to suit the required capacity and preferred bicycle spacing.

Quality Features

Recommended by ADFC (Certification number: Q2105), tested according to DIN 79008, reduced CO₂ footprint, Made in Germany

Wheel Lift Height

The front wheel lift height is 95 mm (low) and 295 mm (high).

Optional

Available with an advertising panel and custom printing.

Application Area

Suitable for the public and semi-public space.

Construction	Main Arch Ø 42 mm Steel Round Tube Wheel Guide Ø 16 mm Steel Round Bar
Wheel Adjustment	single-sided double-sided
Version	Low/High combination Low/Low combination Low setting of the front wheels High setting of the front wheels
Orientation	45° left 45° right 90°
Mounting Type	Above-ground mounting (OKF = ±0,00) Underground mounting (-0,20 m below OKF) Cast-in-place (-0,40 m below OKF)
Mounting Rails	The anti-theft stainless steel screws combined with the trapeze rail ensure maximum security. Thanks to the even load distribution, the trapeze rails place only low demands on the surface of the installation site. Furthermore, the trapezoidal construction of the rails effectively reduces the accumulation of dirt and debris.
Connection Plate	An endless construction is possible by connecting modules using connection straps in any sequence.

Wheeldistance Single-sided (Mm)

	360	400	450	500	600	700	800
low / high
low / low
45°low / low

Wheeldistance Double-sided (Mm)

	360	400	450	500	600	700	800
low / high
low / low

ADFC empfohlen

Mounting

Concrete Screw

For mounting on concrete surfaces and large paved areas. The mounting rails must be attached to a load-bearing floor.

Composite Anchor

For mounting on sealed subfloors. The mounting rails must be attached to a load-bearing floor using composite adhesive and screw connections.

Floor Nail

For mounting on unpaved floors. The mounting rails must be secured with floor nails.

Ballast Pole

For mounting temporary and stationary systems without attachment options. The ballast poles can be used with a wheel spacing of 450 mm.

Wall Angle

Alternative to floor mounting. The mounting rails are to be fixed to the wall with a corner flat iron bar.

Optional Equipment

End Caps

The end caps for trapezoid rails are suitable for completing an installation. They protect against litter and provide a visually appealing and secure finish.

Connection Plate

An endless construction is possible by arbitrarily linking modules using connecting plates.

Edge Protection

The rails are available with pre-mounted edge protection. This protects sensitive floors (e.g., surface protective coatings) from damage and additionally provides sound insulation.