Ilias

Item No.: S302

Customizable charging station for e-bikes and pedelecs.

Features

Charging option

Ilias

Customizable charging station for e-bikes and pedelecs.

Charging Locker Ilias

Anti-theft Casing

The casing is made of anodized aluminum.

Individual Design

The casing, doors, and trim are individually customizable with various RAL colors. Vinyl wrapping featuring your logo and desired design is possible. Powder coating in RAL color is available for an additional charge.

Various Locking Systems

Key lock, coin deposit lock, RFID, PIN, SMS, online

Sufficient Space In Compartments

Large locker Dimensions (H x W x D): Outer approx. 500 x 650 x 350 mm Inner approx. 400 x 430 x 322 mm Small locker Dimensions (H x W x D): Outer approx. 500 x 320 x 350 mm Inner approx. 400 x 200 x 322 mm

High Safety Standards

All outlets are powered only when a plug is inserted, the door is closed, and the connection has been activated by authorization if necessary. Complies with all guidelines and standards.

Modular And Expandable

The lockers are modularly expandable.

Overheating Protection Through Air Circulation

To prevent overheating of the compartments, the cabinets are equipped with passive or optionally active air circulation.

Lockbox Size	A combination of both lockbox sizes is possible, as well as a single one. Each lockbox is equipped with a Schuko socket by standard. It is possible to install a second socket or a charging insert in the floor for a specific battery system. There are two different lockbox sizes: Large Lockbox Dimensions (H x W x D): Outer approx. 500 x 650 x 350 mm Inner approx. 400 x 430 x 322 mm Small Lockbox Dimensions (H x W x D): Outer approx. 500 x 350 x 350 mm Inner approx. 400 x 200 x 322 mm
Number of Blades	The charging cabinet can be customized from 2 to 18 compartments, depending on the selected identification module.
Freewheel Options	Key and Coin Deposit Lock, RFID Authorization, PIN Authorization, SMS Authorization, Online Billing Module, Authorize and Bill via SMS: sms & charge
Dimensions	Number of charging compartments: up to 18 compartments in a maximum 3-row unit: 1 row: 1850 x 650 x 350 mm \| approx. 125 kg 2 rows: 1850 x 1280 x 350 mm \| approx. 175 kg 3 rows: 1850x 1890 x 350 mm \| approx. 225 kg
Material	Anodized aluminum with individual design possible as paint finish in RAL color or cladding. Baked enamel finish in RAL color available at extra cost.
Construction Type	Floor, wall or stand mounting.
Installation	The charging cabinets are pre-wired and ready for immediate operation upon installation by an electrician.
Charging Points	Large Locker: 2 x Schuko socket (1 x standard), 1 x USB connection (optional), 1 x EnergyBus (optional) Small Locker: 2 x Schuko socket (1 x standard), 1 x USB connection (optional), 1 x EnergyBus (optional)
Access and Displays	Status and Information Display: LED status indicator and LCD display (depending on equipment)
Inlet / Outlet Sizes	System Input Voltage / Current: 230 V or 400 V, 3-phase max. 20 A Charging Bay Output Voltage / Current: 230 V, 16 A, 6 A from 4 charging bays System Rated Power: max. 13.8 kW Charging Bay Rated Power: 3.7 kW or 1.4 kW Connection Cross-section: up to 4 mm² Standby Consumption: 12 W
Safety and Environmental Conditions	Degree of Protection: IP44 (according to EN 60529) Conformity: CE marking Safety: FI/ LS 16 A or 6 A per charging bay, main protection 20 A Plug Protection: yes, via contact control Data Connection/Network Integration (optional): GSM
Options	Indoor lighting, USB charging port, cable pass-through for external charging of a charging cable (e.g., for e-scooters or permanently installed battery systems), compressed air compressor, calibrated electricity meter (summation meter), connection with HAK and 3-point meter space for direct grid connection (TAB compliant), automatic door closing, 2nd socket in the charging compartment (only for large charging compartments), outdoor sockets, device for built-in charger, calibrated electricity meter (summation meter or meter per charging compartment), temperature monitoring with shutdown, quiet period function (for PIN, SMS, or Online version)

Mounting

Concrete Screw

For mounting on concrete surfaces and large paved areas. The the Ilias must be attached to a load-bearing floor.

Composite Anchor For Concrete

A composite anchor allows for the secure attachment of components to concrete surfaces by adhesively bonding an anchor rod with a composite material.

Composite Anchor For Asphalt

A composite anchor for asphalt allows the secure attachment of components to asphalt surfaces by adhesively bonding an anchor rod with a composite mass.

Product datasheet

Technical specifications at a glance

Related Products

Bestseller

Made in Germany CO₂ reduced ADFC DIN

Kappa®

F101

Bicycle Racks, Secure

Bestseller

Made in Germany CO₂ reduced ADFC DIN

Felix®

F105

Bicycle Racks, Secure

Bestseller

Atlas

S210

Bike Repair Stations, Connect

Bestseller

Made in Germany

Tia

U106

Bicycle Shelters, Economy